Color Therapy Pdf 86296 | Tie Dye Kit Instructions En

Partial capture of text on file.

PATTERNS - Spiral
1. First follow Steps #1-#4 in Main Directions!
2. Lay the shirt out flat onto a protected surface. Pick a
point on the shirt where you want the spiral to be cen-
tered. At that point, pinch a bit of the fabric and begin
to twist. Keep twisting the shirt around until all the
fabric is in a big flat spiral. (a)
INSTRUCTIONS 3. Place rubber bands around your bundle to keep the
spiral shape round and flat. (b)
English 4. Apply the dye in 3 triangular shapes out from the center
Kit Contents of the spiral. (c) Work the nozzle of the applicator
• 3 applicator bottles of dye bottle into some of the folds to get dye into the inner
• gloves areas. Flip your item over and apply the same color
• mixing bottle (only in • rubber bands matching the shapes on the first side.
JAC9320 & JAC9325) • instructions 5. After applying the dye, finish as in Main Directions -
• soda ash dye fixer • paper towels Step #6.
You’ll Need
• 100% natural fiber t-shirts • bucket
or garments • drop cloth or plastic
• plastic bag or plastic wrap (to protect work area)
S PLEASE READ ALL INSTRUCTIONS
BEFORE YOU BEGIN.
N 1. Prepare your work area by spreading drop
cloths or plastic to protect surfaces. Put on
IO gloves.
2. Add packet of soda ash into a bucket filled
T with about 2 gallons of hot tap water. Stir to
dissolve. Add shirts to soda ash mixture, and
C soak for 20 minutes.
3. Fill dye bottles with warm water to about ½
U inch from the top of the bottle. Recap the
R bottle and shake to mix.
4. Wring out your shirts from the soda ash
T mixture. Do not rinse. Soda ash mixture can
S be re-used.
5. Tie up your shirts and dye in one of the
N following patterns or make up your own!
There’s no right or wrong way to do it.
6. After you have applied the dye, place shirts
N I in a plastic bag or wrap in plastic. Let sit 12
I to 24 hours. Rinse in cool water. Wash as
normal with like colors.make smaller triangles
A (or just lines) beside the main color. Repeat on
M the other side. (d)
JACQUARD PRODUCTS
Rupert, Gibbon & Spider, Inc.
P.O. Box 425 | Healdsburg, CA 95448
phone 800.442.0455 | fax 707.433.4906
Tie Die Kit Instructions_EN_Web 12.9.11 1 www.jacquardproducts.com | service@jacquardproducts.com
Circles or Spots Accordion Folds
1. First follow Steps #1-#4 in Main Directions! 1. First follow Steps #1-#4 in Main Directions!
2. Pull up the fabric at any point and put a rubber band 2. This is a simple back and forth fold. You can get creative
tightly around it. (d) by where you start your folding. Try some of these
3. Repeat wherever you want to make another spot. ideas:
4. There are many ways to apply the dye. Try any of these • Start from one edge of the shirt (top, bottom, or
ways or just experiment with your own: side) and work your way across. (f)
• Put one color around the spot and another color on • Start from one corner. (g)
the rest of the shirt. • Fold only a part of the shirt making a pattern along
• Alternate colors on the spots only. the bottom, middle, or top of the shirt. (h)
• Apply colors in stripes along the pulled up area of • Fold from a pivot point, such as in folding a fan. (i)
your spot. (e) 3. After folding, place rubber bands tightly around the
4. After applying the dye, finish as in Main Directions - folded area.
Step #6. 4. There are endless ways to apply the dye:
d • Make stripes of varying widths.
• Apply the dye randomly.
• Make stripes in one
color.
5. After applying the dye, f
finish as in Main Directions
- Step #6.
e
g
h
i
JACQUARD PRODUCTS
Rupert, Gibbon & Spider, Inc.
P.O. Box 425 | Healdsburg, CA 95448
phone 800.442.0455 | fax 707.433.4906
Tie Die Kit Instructions_EN_Web 12.9.11 2 www.jacquardproducts.com | service@jacquardproducts.com
Scrunch or Brain
1. First follow Steps #1-#4 in Main Directions!
2. Lay the shirt out flat onto a protected surface. (a)
3. Spreading your fingers wide and place them on the
shirt. Draw your fingers in and repeatedly scrunch up
the fabric in a kind of a brain looking bundle. (b)
4. Loosely apply rubber bands to hold the bundle
together. (c)
5. Apply the dye randomly in spots. You can push the
nozzle of the applicator bottle into some of the folds as
you squeeze.
6. After applying the dye, finish as in Main Directions -
Step #6.
a
b
c
a
d
b
c
a
d
b
c
d
JACQUARD PRODUCTS JACQUARD PRODUCTS
Rupert, Gibbon & Spider, Inc. Rupert, Gibbon & Spider, Inc.
P.O. Box 425 | Healdsburg, CA 95448 P.O. Box 425 | Healdsburg, CA 95448
phone 800.442.0455 | fax 707.433.4906 phone 800.442.0455 | fax 707.433.4906
www.jacquardproducts.com | service@jacquardproducts.comTie Die Kit Instructions_EN_Web 12.9.11 3 www.jacquardproducts.com | service@jacquardproducts.com

The words contained in this file might help you see if this file matches what you are looking for:

...Patterns spiral first follow steps in main directions lay the shirt out flat onto a protected surface pick point on where you want to be cen tered at that pinch bit of fabric and begin twist keep twisting around until all is big instructions place rubber bands your bundle shape round b english apply dye triangular shapes from center kit contents c work nozzle applicator bottles bottle into some folds get inner gloves areas flip item over same color mixing only matching side jac after applying finish as soda ash fixer paper towels step ll need natural fiber t shirts bucket or garments drop cloth plastic bag wrap protect area s please read before n prepare by spreading cloths surfaces put io add packet filled with about gallons hot tap water stir dissolve mixture soak for minutes fill warm u inch top recap r shake mix wring do not rinse can re used tie up one following make own there no right wrong way it have applied i let sit hours cool wash normal like colors smaller triangles just li...

Related files

Share

Help

Related files

Share

Share to social media

Help

Login Area