166x Filetype PPTX File size 2.58 MB Source: www.chem.ucla.edu
Introduction • Chromatography was discovered by Russian botanist Mikhail Semyonovich Tsvett, who separated plant pigments using calcium carbonate columns (1901) • Martin and Synge (NP 1952) established many of the basic techniques in partition chromatography i.e., paper chromatography, gas chromatography, HPLC, etc. Introduction • Chromatography is used in the separation and purification of smaller quantities whereas distillation and recrystallization is used for large scale separations and purifications: • The sample is (completely) adsorbed on the stationary phase before the mobile phase (the solvent) moves across the stationary phase. • The strength of interaction of the compound with the stationary phase, the solubility of the compound in the mobile phase as well as the eluting power of the mobile phase will dictate the degree of migration and the quality of separation. • The separation of compounds in a mixture is based on the different affinities for the stationary phase and the mobile phase. Thus, each compound has a different partition coefficient between these two phases. • The higher the affinity of the compound towards the stationary phase and the lower affinity for the mobile phase (=solubility), the less the compound will migrate resulting in a later elution from the stationary phase (CC) or lower R-value (in TLC). f Stationary Phase I • Commonly used are silica, alumina, cellulose (i.e., paper chromatography), etc. O Al Al O O Al Al Al O O O Al Al • These stationary phases are considered polar because of the presence of hydroxyl groups on the surface. • They can be modified by attaching non-polar groups to the hydroxyl functions i.e., long hydrocarbon chains (C8, C18). • Silica coated TLC plates are primarily used in organic labs because most of the compounds analyzed in the lab are (weakly) polar due to the presence of carbonyl groups, hydroxyl functions, etc. • The type of stationary phase used in a given separation problem depends on the polarity of compounds and the separation mechanism. Stationary Phase II • By reacting these stationary phases with a silyl compound or a long-chain hydrocarbon (C-18), the polarity of the stationary phase can be reversed (heavily used on HPLC). • Sugar or amino acid derivatives are used as stationary phase to separate chiral compounds i.e., enantiomers of camphor in HPLC or GC, chiral epoxides, etc. • However, not every chromatographic process is based on adsorption of the compound on a stationary phase. In GC, partition chromatography is used, where the solute equilibrates between the stationary, liquid phase and the mobile phase, the carrier gas. • Ion-exchange chromatography utilizes resins that have sulfon (-SO -) or ammonium groups 3 + (-NR3 ) on their surface that can bind ions using electrostatic forces (i.e., water purification), Stationary Phase III • In molecular exclusion chromatography, molecules are separated by size. Larger molecules pass through the column more quickly because they are too large for the pores to diffuse into them. • Finally, affinity chromatography employs the specific interaction of the solute with a second molecule that is covalently attached to the stationary phase i.e., antibody.
no reviews yet
Please Login to review.