Filetype PDF | Posted on 08 Feb 2023 | 2 years ago
Authentication
digital resources
136x Filetype PDF File size 0.12 MB Source: www.sidat.cz
COURSES
AND TRAINING
Overview of courses, training sessions,
seminars and workshops
ENGLISH
COMPREHENSIVE AUTOMATION
INDUSTRIAL INFORMATICS
INTEGRATION PROJECTS, INDUSTRY 4.0
CUSTOMER CARE
Our Training Centre organises ST-MICRO1
standardised courses and BASIC PROGRAMMING COURSE FOR
specialised training sessions, SIMATIC S7-1200 IN TIA PORTAL
seminars and workshops.
Standardised courses are authorised by Siemens DESCRIPTION basic programming course focused
and completed by issuing the respective certifi cate. on the basics of confi guration, programming and
The Centre is authorised to provide educational diagnostics of PLC SIMATIC S7-1200 andԝTIA Portal
activities reimbursed from the EU funds. STEP 7 Basic
The programme of specialised training sessions, COURSE TYPE programming and service course
seminars and workshops is prepared by the COURSE IS INTENDED FOR The course is designed
Training Centre on the basis of a specifi c for electrical maintenance staff, designers and
requirement of the customer and as agreed programmers who develop and modify new and
upon with him. current projects for SIMATIC S7-1200 control
systems in the TIA Portal environment.
Most training events which are part of DURATION 3 days
the Training Centre programme may be: MAXIMUM NUMBER OF PARTICIPANTS 6 participants
— held outside the Training Centre (for example maximum of 2 participants per workstation
at the customer’s site or that of his business COURSE LANGUAGE cz DOCUMENTS LANGUAGE cz
partner) PREREQUISITES it is required to have a general
— held in Czech or English language, some of knowledge of PLC and basic computer skills
them also available in German or Russian COURSE CONTENT
— adapted to suit the operating mode of — System overview
automated production systems — STEP 7 basics
(this for example concerns courses and — Devices and Networks
training sessions focused on diagnostics, — Online tools
trouble-shooting, hot-fi xes, service-packs — PLC tags
and up-grades, held at the customer’s site. — Programming blocks
— adapted to meet the individual educational — Binary and digital operations
needs and requirements of the customers. — Data blocks
— Organization blocks
— Introduction to HMI
— Troubleshooting
COURSE DATES regularly held course
PRICE 9,900 CZK / 399 €
PAGE 2 PAGE 3
ST-SERV1 ST-SERV2
SERVICE COURSE 1 SERVICE COURSE 2
FOR SIMATIC S7-300/400 IN STEP 7 FOR SIMATIC S7-300/400 IN STEP 7
DESCRIPTION basic service course focused on DESCRIPTION extension service course focused on
the basics of confi gurations, programming and programming and diagnostics of SIMATIC S7-
diagnostics of PLC SIMATIC S7-300/400 in STEP 7 300/400 control systems in STEP 7
COURSE TYPE service course COURSE TYPE service course
COURSE IS INTENDED FOR for electrical maintenance COURSE IS INTENDED FOR electrical maintenance
staff, service technicians who are design basic staff, service technicians who design service and
service and diagnostics operations with SIMATIC diagnostics operations with SIMATIC S7-300/400
S7-300/400 control systems in STEP 7 control systems in STEP 7
DURATION 5 days DURATION 5 days
MAXIMUM NUMBER OF PARTICIPANTS 8 participants MAXIMUM NUMBER OF PARTICIPANTS 8 participants
maximum of 2 participants per workstation maximum of 2 participants per workstation
COURSE LANGUAGE cz DOCUMENTS LANGUAGE cz, en COURSE LANGUAGE cz DOCUMENTS LANGUAGE cz, en
PREREQUISITES it is required to have a general PREREQUISITES it is required to have an advanced
knowledge of PLC and basic computer skills knowledge in the equivalence of the ST-SERV1
COURSE CONTENT course
— The SIMATIC S7 system family COURSE CONTENT
— Installation and maintenance of the PLC — Hardware and software commissioning
— The SIMATIC Manager — Data storage in data blocks
— Hardware confi guration — Functions and function blocks
— Hardware commissioning — Troubleshooting
— Block architecture and block editor — System information
— Symbols — Organization blocks
— Binary operations — Analog value processing
— Digital operations — Documenting, Saving and Archiving
— Rewiring a user program — MPI communication
— Documenting, saving and archiving COURSE DATES regularly held course
COURSE DATES regularly held course PRICE 13,290 CZK / 499 €
PRICE 13,290 CZK / 499 €
PAGE 4 PAGE 5
ST-PRO1 ST-PRO2
PROGRAMMING COURSE 1 PROGRAMMING COURSE 2
FOR SIMATIC S7-300/400 IN STEP 7 FOR SIMATIC S7-300/400 IN STEP 7
DESCRIPTION programming course focused on DESCRIPTION extension programming course
programming and designing SIMATIC S7-300/400 focused on SIMATIC S7-300/400 PLC
control systems in STEP 7 COURSE TYPE programming course
COURSE TYPE programming course COURSE IS INTENDED FOR programmers and designers
COURSE IS INTENDED FOR programmers and designers, who want to extend their programming knowledge
who work on current devices or commission in the STEP 7 environment
SIMATIC S7-300/400 control systems in STEP 7 DURATION 5 days
DURATION 5 days MAXIMUM NUMBER OF PARTICIPANTS 8 participants
MAXIMUM NUMBER OF PARTICIPANTS 8 participants maximum of 2 participants per workstation
maximum of 2 participants per workstation COURSE LANGUAGE cz DOCUMENTS LANGUAGE cz, en
COURSE LANGUAGE cz DOCUMENTS LANGUAGE cz, en PREREQUISITES it is required to have an advanced
PREREQUISITES it is required to have a general knowledge in the equivalence of the ST-PRO1
knowledge of PLC and basic computer skills course
COURSE CONTENT COURSE CONTENT
— The SIMATIC S7 system family — Instructions independent of the RLO bit
— The SIMATIC Manager — Accumulator functions
— Hardware confi guration — Real numbers instructions
— Block architecture and block editor — Indirect addressing and address register
— Binary operations instructions
— Digital operations — Data types and variables in STEP 7
— Symbols — Block call and multi-instance model
— Test functions — Library utilization
— Data storage in data blocks — Handling of asynchronous
— Functions and function blocks and synchronous errors
— Troubleshooting — Generating program in text editor
— Organization blocks — Basic and advanced communication
— Analog value processing — SIMATIC S7-400
— Documenting, saving and archiving — Distributed I/O and parameters assignment
— MPI communication — Technological tools for S7/M7
COURSE DATES regularly held course — Indirect FC and FB parameters access
PRICE 13,290 CZK / 499 € COURSE DATES regularly held course
PRICE 13,290 CZK / 499 €
PAGE 6 PAGE 7
no reviews yet
Please Login to review.
