s 
                                                                  Preface,  
                                                                  Contents 
                                                                                                    1 
                                                                  Bit Logic Instructions 
                                                                                                    2 
                 SIMATIC                                          Comparison Instructions 
                                                                                                    3 
                                                                  Conversion Instructions 
                 Statement List (STL) for                                                           4 
                 S7-300 and S7-400                                Counter Instructions 
                 Programming                                                                        5 
                                                                  Data Block Instructions 
                                                                                                    6 
                                                                  Logic Control Instructions 
                                                                   
                 Reference Manual                                 Integer Math Instructions         7 
                                                                  Floating-Point Math               8 
                                                                  Instructions 
                                                                                                    9 
                                                                  Load and Transfer Instructions
                                                                                                   10
                                                                  Program Control Instructions 
                                                                                                   11
                                                                  Shift and Rotate Instructions 
                                                                                                   12
                                                                  Timer Instructions 
                                                                                                   13
                                                                  Word Logic Instructions 
                                                                                                   14
                                                                  Accumulator Instructions 
                                                                                                      
                                                                  Appendices 
                                                                  Overview of All STL               A 
                 This manual is part of the documentation         Instructions 
                 package with the order number:                                                     B 
                 6ES7810-4CA08-8BW1                               Programming Examples 
                                                                                                    C 
                                                                  Parameter Transfer 
                 Edition 03/2006                                                                      
                 A5E00706960-01 
                                                                  Index 
                  
                  
                 Safety Guidelines 
                           This manual contains notices you have to observe in order to ensure your personal safety, as well as to 
                           prevent damage to property. The notices referring to your personal safety are highlighted in the manual 
                           by a safety alert symbol, notices referring to property damage only have no safety alert symbol. The 
                           notices shown below are graded according to the degree of danger. 
                  
                  !        Danger 
                            indicates that death or severe personal injury will result if proper precautions are not taken. 
                  
                  !        Warning 
                            indicates that death or severe personal injury may result if proper precautions are not taken. 
                  
                  !        Caution 
                            with a safety alert symbol indicates that minor personal injury can result if proper precautions are not 
                           taken. 
                  
                           Caution 
                           without a safety alert symbol indicates that property damage can result if proper precautions are not 
                           taken. 
                  
                           Notice 
                           indicates that an unintended result or situation can occur if the corresponding notice is not taken into 
                           account. 
                           If more than one degree of danger is present, the warning notice representing the highest degree of 
                           danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a 
                           warning relating to property damage. 
                 Qualified Personnel 
                           The device/system may only be set up and used in conjunction with this documentation. Commissioning 
                           and operation of a device/system may only be performed by qualified personnel. Within the context of 
                           the safety notices in this documentation qualified persons are defined as persons who are authorized to 
                           commission, ground and label devices, systems and circuits in accordance with established safety 
                           practices and standards. 
                 Prescribed Usage 
                           Note the following: 
                  
                  !        Warning 
                            This device and its components may only be used for the applications described in the catalog or the 
                           technical description, and only in connection with devices or components from other manufacturers 
                           which have been approved or recommended by Siemens. 
                           Correct, reliable operation of the product requires proper transport, storage, positioning and assembly 
                           as well as careful operation and maintenance. 
                 Trademarks 
                           All names identified by ® are registered trademarks of the Siemens AG.  
                           The remaining trademarks in this publication may be trademarks whose use by third parties for their 
                           own purposes could violate the rights of the owner. 
                 Disclaimer of Liability 
                           We have reviewed the contents of this publication to ensure consistency with the hardware and 
                           software described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. 
                           However, the information in this publication is reviewed regularly and any necessary corrections are 
                           included in subsequent editions. 
                           Siemens AG                  A5E00706960-01        Copyright © Siemens AG 2006  
                           Automation and Drives       03/2006               Technical data subject to change 
                           Postfach 4848 
                           90437 NÜRNBERG 
                           GERMANY 
                  
                  
                  
                  
            
           Preface 
           Purpose 
                  This manual is your guide to creating user programs in the Statement List 
                  programming language STL. 
                  The manual also includes a reference section that describes the syntax and 
                  functions of the language elements of STL. 
           Basic Knowledge Required 
                  The manual is intended for S7 programmers, operators, and maintenance/service 
                  personnel.  
                  In order to understand this manual, general knowledge of automation technology is 
                  required. 
                  In addition to, computer literacy and the knowledge of other working equipment 
                  similar to the PC (e.g. programming devices) under the operating systems 
                  MS Windows 2000 Professional, XP Professional or MS Windows Server 2003 are 
                  required. 
           Scope of the Manual 
                  This manual is valid for release 5.4 of the STEP 7 programming software package. 
           Compliance with Standards 
                  STL corresponds to the "Instruction List" language defined in the International 
                  Electrotechnical Commission's standard IEC 1131-3, although there are substantial 
                  differences with regard to the operations. For further details, refer to the table of 
                  standards in the STEP 7 file NORM_TBL.WRI. 
           Statement List (STL) for S7-300 and S7-400 Programming 
           A5E00706960-01                                       iii 
                     Preface 
                     Requirements 
                                   To use the Statement List manual effectively, you should already be familiar with 
                                   the theory behind S7 programs which is documented in the online help for STEP 7. 
                                   The language packages also use the STEP 7 standard software, so you should be 
                                   familiar with handling this software and have read the accompanying 
                                   documentation.  
                                   This manual is part of the documentation package "STEP 7 Reference". 
                                   The following table displays an overview of the STEP 7 documentation: 
                                    
                      Documentation Purpose Order Number 
                      STEP 7 Basic Information with               Basic information for technical    6ES7810-4CA08-8BW0
                      •    Working with STEP 7,                   personnel describing the methods 
                           Getting Started Manual                 of implementing control tasks with 
                      •    Programming with STEP 7                STEP 7 and the S7-300/400 
                      •    Configuring Hardware and               programmable controllers. 
                           Communication Connections,  
                           STEP 7  
                      •    From S5 to S7, Converter Manual  
                      STEP 7 Reference with                       Provides reference information     6ES7810-4CA08-8BW1
                      •    Ladder Logic (LAD)/Function Block      and describes the programming 
                           Diagram (FBD)/Statement List (STL) for  languages LAD, FBD, and STL, 
                           S7-300/400 manuals                     and standard and system 
                      •    Standard and System Functions          functions extending the scope of 
                           for S7-300/400                         the STEP 7 basic information. 
                           Volume 1 and Volume 2 
                                    
                                    
                      Online Helps                                Purpose                            Order Number 
                      Help on STEP 7                              Basic information on               Part of the STEP 7 
                                                                  programming and configuring        Standard software. 
                                                                  hardware with STEP 7 in the form 
                                                                  of an online help. 
                      Reference helps on STL/LAD/FBD              Context-sensitive reference        Part of the STEP 7 
                      Reference help on SFBs/SFCs                 information.                       Standard software. 
                      Reference help on Organization Blocks 
                                    
                                                                          Statement List (STL) for S7-300 and S7-400 Programming 
                     iv                                                                                      A5E00706960-01